Are Lights And Sockets On Same Circuit?


Technically, you can wire a socket onto a light circuit, but it is not recommended. There can be problems with overloading the circuit. If you add a socket to a lighting circuit, do it in parallel. Otherwise, the light switch will control the circuit.



Can you wire a ceiling light to a plug UK?

Can you wire a ceiling light to a plug? You can wire a ceiling light to a plug. It can be done by re-wiring the light with the use of an extension cord and plugging it into the available wall outlet. This is an easy DIY solution if there is no hardwire available on the ceiling.


Can you put a socket behind a washing machine?

Sockets are fine behind appliances but you should allow for ease of isolation (which would be your fuse spur above the worktop). I do a few bits for kitchen fitters and socket in the cupboards are the norm now, personally I'd rather have this way than switches above on view.


Can I turn a single socket into a double?

If you are wondering whether you can swap any single socket for a double, then the answer is yes, providing the existing socket is the only one on that spur (wire feed) from the ring main.


How many times can I spur off a socket?

A spur can be connected to an existing socket, on either a ring main or a radial circuit, providing that socket does not already have a spur. That is only one spur per socket is allowed and the number of spurs must not exceed the number of sockets.


Can I run a spur from a light switch?

Unless there is a neutral at the light switch, you'd better run the spur from the nearest light fitting.


Can I install a fused spur myself?

As long as the job isn't within a 'special location' such as a bathroom or outdoors, you're also allowed to install additional new light fittings, switches, sockets and even add a single fused spur to an existing circuit (a 'spur' is a new cable and socket run as a branch from an existing socket on the ring main).


How many sockets does 1 Spur have?

one spur


What appliances need a fused spur?

Fused spurs are commonly used as an alternative to a conventional socket, for the installation of powerful electrical appliances that can be installed without a plug, such as ovens, washing machines, electric heaters, dishwashers, fridges, and so on.


Can you put a double socket on a spur?

A spur can feed one single or one double socket or a fused connection unit.


Why can you not spur off a spur?

The reason for not running two spurs from the same spur "point" is that it can lead to possible overloads in that one leg of the final can become unbalanced and exceed the max.


What does spur mean in electrical terms?

Spur - An electrical supply using one feed cable to a socket taken off a ring main usually used to achieve an extra socket without having to do too much work.


Can you spur off a ceiling rose?

There are various ways of extending a lighting circuit to add lighting points: You could run a spur from the last ceiling rose in a loop-in circuit; run a spur from an existing junction box, or from a new junction box; or run a fused spur from a socket outlet.


Are lights and sockets on same circuit?

Technically, you can wire a socket onto a light circuit, but it is not recommended. There can be problems with overloading the circuit. If you add a socket to a lighting circuit, do it in parallel. Otherwise, the light switch will control the circuit.


Can I run a washing machine off a spur?

Provided that the spur is directly off the ring main and it is at least 2.5mm cable then this is a "legal" arrangement as far as the regs go. So yes you can do this.


Can you spur off any socket?

The easiest way of connecting into a ring circuit is to run a spur cable from the terminals of an existing socket – but you can't connect it to any socket. The IEE Wiring Regulations are very specific about this. You mustn't run a spur from a socket that's already on a spur, or that already supplies a spur.


Can I use a plug instead of a fused spur?

So as long as the plug sockets are accessible without touching the appliance to turn it off then this is fine, but also a fused spur is fine too."


Do I need a fused spur?

A Fused Spur Switch is commonly used for powerful electrical appliances, such as washing machines and dish washers that need to be installed without a plug; they are also used for electrical items that need to be installed on a separate cable from the ring main, for safety and maintenance purposes.


Can I spur off a fused spur?

the regs say you can have unlimited fused spurs but only the same number of unfused spurs as there is sockets but you cannot spur of a spur fused or unfused, regards Terry.


What is a spur socket outlet?

A fused spur is a switch that's used to isolate electrical equipment from the mains supply. You'll typically find them on the left or right of your oven or hob, and next to or underneath your heater.


Should a boiler be plugged into a socket?

A boiler can be either connected via a switched fused connection unit (spur) or an UNswitched socket outlet - not a switched socket outlet


Dated : 24-Jun-2022

Category : Education

Leave Your Comment