What Instrument Measures Formability?


Which instrument is used to measure formability? Explanation: Erichsen machine is used to measure formability of sheet metal.



What is impact strength Mcq?

Explanation: Impact strength is the ability of a material to withstand impact load without fracture.


What are the 3 stages of creep?

Primary Creep: starts at a rapid rate and slows with time. Secondary Creep: has a relatively uniform rate. Tertiary Creep: has an accelerated creep rate and terminates when the material breaks or ruptures. It is associated with both necking and formation of grain boundary voids.


What is the unit of tensile strength of a material Mcq?

Thus MPa, N/m2 and psi are units for ultimate tensile strength. Explanation: The ability of the material to withstand uniaxial tensile force is known as tensile strength.


What instrument measures formability?

Which instrument is used to measure formability? Explanation: Erichsen machine is used to measure formability of sheet metal.


Why do we test tensile strength?

It is used to find out how strong a material is and also how much it can be stretched before it breaks. This test method is used to determine yield strength, ultimate tensile strength, ductility, strain hardening characteristics, Young's modulus and Poisson's ratio.


What is the unit of impact strength Mcq?

Explanation: The SI Unit for impact strength is expressed as MN/m2.


What is the difference between stress and strength?

Stress is a measure of how much force an object experiences per unit area, and strength is a material's ability to withstand stress. When the stress exceeds the strength of a part, it fails.


What is creep in strength of materials Mcq?

Explanation: Creep is defined as a slow rise of plastic deformation under the action of shear stresses when it is below the yield strength of the material. 2.


What job can you get with a materials engineering degree?

Careers for Materials Engineers

  • Automotive sheet metal engineers.
  • Ceramic engineers.
  • Composites engineers.
  • Forensic materials engineers.
  • Glass science engineers.
  • Metallographers.
  • Metallurgical engineers.
  • Metallurgists.


What are the types of forming?

Some of example of forming processes are:

  • Forging.
  • Extrusion.
  • Rolling.
  • Sheet metal working.
  • Rotary swaging.
  • Thread rolling.
  • Explosive forming.
  • Electromagnetic forming.


What is the edge distance?

Edge distance is a term used in sheet metal aircraft construction. It refers to the distance from the center of a rivet to the edge of the material it is holding together.


What are the test methods that can be applied in material testing?

In most test techniques the specimen is destroyed:

  • Impact test.
  • Sheet metal forming.
  • Drop weight test.
  • High-speed tensile test.
  • Tensile test.
  • Biaxial test.
  • Compression test/crush test.
  • Creep test.


Dated : 22-Jun-2022

Category : Education

Leave Your Comment