What Is Meant By Crossing Of Cheque?


A crossed check is any check that is crossed with two parallel lines, either across the whole check or through the top left-hand corner of the check. This double-line notation signifies that the check may only be deposited directly into a bank account.



How do trains cross tracks?

A rotary switch rotates about its long axis to present a track connection to a chosen set of tracks. Physically, it flips over (rotates about its long axis 180 degrees) to connect to the chosen set of tracks. Once the rotary switch is secured the train can proceed.


What is switch entry angle?

Switch angle or angle of switch divergence is defined as the angle formed between the gauge lines of the stock rail and tongue rail(Switch rails). If the switch angle is more, the entry of the train will not be smooth and consequently, the speed of trains will have to be reduced.


How does a train switch tracks?

Trains change track using a machine that switches the direction of the rails. The switch or point machine moves blades of rail into place that change the direction of the train wheels. Deciding which track a train should use is the job of the train controller, though it is usually handled automatically by computer.


What is meant by crossing of cheque?

A crossed check is any check that is crossed with two parallel lines, either across the whole check or through the top left-hand corner of the check. This double-line notation signifies that the check may only be deposited directly into a bank account.


At what angle should a railway line cross a road?

(1) All roads should preferably cross the railway line at right angles. In special cases, when modification is required to suit the road approaches the angle of crossing should not be less than 45°. (2) At all level crossings the gate posts shall be fixed square to the road.


How many railway crossings are there in India?

There are a little over 19,000 manned level crossings in the country as of now. Another set of data shows, the Railways produced 4,484 LHB coaches in April-December 2019 compared to 3,121 in April- December 2018 which is a jump of almost 44 per cent.


What are types of crossing in railway?

Types Of Crossing:

  • On the basis of shape of crossing.
  • square crossing.
  • Acute angle or V-crossing or Frog.
  • Obtuse angle or Diamond crossing.
  • On the basis of assembly of crossing.
  • Ramped crossing.
  • Spring or movable crossing.


What are the different types of crossing?

There are various different types of pedestrian crossings, these are:

  • Zebra.
  • Pelican.
  • Puffin.
  • Toucan.
  • Pegasus (also known as Equestrian crossings)


What is crossing in transportation?

A crossing or frog is a device introduced at the point where two gauge faces cross each other to permit the flanges of a railway vehicle to pass from one track to another (Fig. 14.5).


Why are crosses and switches important?

The turnout (Switch & Crossing, S&C) is a vital component in railway networks as it provides flexibility to traffic operation by allowing trains to switch between tracks.


What is switch and crossing?

Switches and crossings – these are moveable sections of track that guide trains from one track to another and allow them to cross paths. They have an especially limited lifespan because trains cause wear and deformation when they travel across them.


How do you cross a railway line safely?

Cross railroad tracks only at designated pedestrian or roadway crossings and obey all warning signs and signals. Always stop, look both ways, and listen for trains before crossing the tracks.


What is lead of crossing?

Lead – The track portion between heels of switch to the beginning of crossing assembly is called lead.


What is the difference between railway crossing and level crossing?

Unsourced material may be challenged and removed. A level crossing is an intersection where a railway line crosses a road or path, or in rare situations an airport runway, at the same level, as opposed to the railway line crossing over or under using an overpass or tunnel.


What is angle of crossing?

The angle which is formed between the gauge faces of the Vee is known as the crossing angle or angle of the railway crossing. Following are the three methods used to determine the angle of crossing in railway.


What is throw of switch in railway?

Explanation. Throw of switch: (i) It is the distance between the running face of the stock rail and the toe of the tongue rail. (ii) Its limiting values are 95-115 mm for BG routes and 89-100 mm for MG routes. Additional Information.


What do you mean by crossing?

Definition of crossing

1 : the act or action of crossing: such as. a : a traversing or traveling across. b : an opposing, blocking, or thwarting especially in an unfair or dishonest manner.


What is meant by crossing in railway?

countable noun. A railroad crossing is a place where a railroad track crosses a road at the same level.


What is point and crossing in railway?

Points and Crosssing is the special arrangement provided on railway track to facilitate trains to be diverted from one track to another. Whereas combination of points and crossings by which a train is diverted from one track to another track, is known as Turn Out.


Dated : 13-Jul-2022

Category : Education

Leave Your Comment