Tensile strength is usually measured as **the amount of force in pounds per square inch (psi) or megapascals (MPa) required to pull a specimen to the point of material failure**. This test is accomplished by placing a dumbbell shaped specimen into the grips, or jaws, of a tensometer.

1. Tensile strength is **the ability of a material to resist tearing**. An example of tensile strength is how much force can be put on a material before it tears apart. noun.

Volumetric Strain: The volumetric strain is **the unit change in volume**, i.e. the change in volume divided by the original volume.

Strain is **the deformation of a material from stress**. It is simply a ratio of the change in length to the original length. Deformations that are applied perpendicular to the cross section are normal strains, while deformations applied parallel to the cross section are shear strains.

The definition of the tensile stress is. tensile stress = F ⊥ A . tensile stress = F ⊥ A . 12.34. **Tensile strain is the measure of the deformation of an object under tensile stress** and is defined as the fractional change of the object's length when the object experiences tensile stress.

Shear strain is **the ratio of displacement to an object's original dimensions due to stress**, and is the amount of deformation perpendicular to a given line rather than parallel to it.

It is **the stress induced in a body when subjected to two equal and opposite pulls**. The ratio of change in length to the original length is the tensile strain.

Tensile load: **The ratio of the applied force divided by the unit area that has a tendency to elongate or stretch the material**. Tensile load, which tends to increase the length of a material, is the opposite of compression, which tends to reduce the length of a material. Tensile load is also called tensile stress.

Strain is defined as **the amount of deformation of a material in the direction of the applied force divided by the initial length of the material**.

Tensile Strain

Strain is **the extension per unit length**. This is a deformation of a solid due to stress in the form of elongation or contraction.

Tensile stress is measured in units of force per unit area. The unit is **newton per square meter (N/m^2), kilogram (force) per square centimeter (kg/cm^2) or pascal**.

Tensile-strain definition

(physics) **The relative elongation of a material when subjected to tension**.

What is Strain? Strain is **the amount of deformation experienced by the body in the direction of force applied, divided by the initial dimensions of the body**.

tensile strength, **maximum load that a material can support without fracture when being stretched, divided by the original cross-sectional area of the material**.

Tensile Stress. **A measurement of the force required to pull something such as a rope, wire, or a structural beam to the point where it breaks**. Tensile Strength.

In continuum mechanics, lateral strain, also known as transverse strain, is defined as **the ratio of the change in diameter of a circular bar of a material to its diameter due to deformation in the longitudinal direction**.

Tensile strength is usually measured as **the amount of force in pounds per square inch (psi) or megapascals (MPa) required to pull a specimen to the point of material failure**. This test is accomplished by placing a dumbbell shaped specimen into the grips, or jaws, of a tensometer.

Dated : 06-Jul-2022

Category : Education