What Type Of Steam Is Produced In The Steam Boiler?

A boiler incorporates a firebox or furnace in order to burn the fuel and generate heat. The generated heat is transferred to water to make steam, the process of boiling. This produces saturated steam at a rate which can vary according to the pressure above the boiling water.

What is steam turbine engine?

A steam turbine is a machine that extracts thermal energy from pressurized steam and uses it to do mechanical work on a rotating output shaft. Its modern manifestation was invented by Charles Parsons in 1884.

What is turbine in boiler?

The boiler generates steam at high pressure and high temperature. The steam turbine converts the heat energy of steam into mechanical energy. The generator then converts the mechanical energy into electric power.

What are boiler accessories?

Boiler accessories are devices and plants that are installed with boilers to improve the operating condition and overall efficiency of the boiler plant. Boiler accessories are devices that are installed along the boiler and the surrounding area to increase the efficiency of the boiler.

What are the four main safety features required on steam boiler?

Smoke density alarm. Low pressure fuel oil alarm. Low or high fuel oil temperature alarm. Easing gear arrangement.

What are the 2 parts of the boiler?

Parts of Boiler and Their Function in the Boilers

  • Combustion chamber or firebox.
  • Heat exchanger.

What type of steam is produced in the steam boiler?

A boiler incorporates a firebox or furnace in order to burn the fuel and generate heat. The generated heat is transferred to water to make steam, the process of boiling. This produces saturated steam at a rate which can vary according to the pressure above the boiling water.

What are the types of steam turbine?

In order to match steam production to heat demand, there are three types of steam turbine in common use for CHP plants. These three are called a back pressure steam turbine, an extraction steam turbine and a condensing steam turbine. Each type will suit a different configuration of plant.

What are 3 types of boiler and define each?

Boilers can be broadly classified as shell tube and water tube boilers.

  • Shell and tube boilers. Shell and tube boilers are also referred to as fire tube or smoke tube boilers.
  • Different types of fire tube boilers:
  • Lancashire boiler:
  • Locomotive boiler.
  • Reversal Chamber:
  • Wet Back Boilers:
  • Dry Back Boilers:
  • Two pass boilers:

What is the formula of steam?

Answer. Steam is basically water in its gaseous form so it can be chemical components is H2O.

What are the types of steam boiler discuss each?

There are two basic boiler styles for steam boilers in this range, Firetube and Watertube boilers. As their names imply, the Firetube boiler has the fire (combustion gases) inside the tube and the Watertube boiler has the water inside the tube.

In which steam turbine nozzles are used?

The nozzles are just located just before the steam turbines. Three important types of steam nozzles are:- 1) Convergent Nozzle, 2) Divergent Nozzle, 3) Convergent-Divergent Nozzle. If no heat is supplied from the surroundings; then q = 0. This is a steady flow energy equation of nozzle.

What are the five types of steam turbine?

While based on the flow of steam they can be classified as a single flow, double flow and reverse flow turbines. Similarly, based on exhaust conditions, there are five main types of steam turbines; condensing, non-condensing, automatic extraction, mixed pressure, and regenerative extraction.

What are the types of boilers?

Different Types of Boilers

  • Steam Boiler. Both hot water and steam boilers use a heat exchanger as a tool to heat water and distribute it to a piped system connected to radiators around the home.
  • Hot Water Boiler.
  • Natural Gas Boiler.
  • Electric Boiler.
  • Oil Boiler.
  • Condensing Boiler.

What are the main components of the steam boiler?

Steam boiler parts and components

Different boilers might have different designs, but three main parts remain the same throughout various designs: The combustion chamber, the heat exchanger, and the burner.

How important are A Level mocks?

Mocks help to establish what you know, and what you don't

Regular tests are a good way to find out where your strengths are, as well as identifying the areas that require attention. Doing this at various points throughout the year gives students plenty of time to adjust to the pressure of final exams.

How do you read a log table?

Q4: How do you read a log table? A: Take the first 2 digits of the number irrespective of the decimal and look for the row with that number. Next look for the column number corresponding to the third digit of the number. You may also need to look into the mean difference table to get the final value.

How is a solution formed Class 4?

A solution forms when a substance dissolves, or breaks apart, into another substance. The substance that dissolves to form a solution is called a solute. The substance in which a solute will dissolve is called a solvent. In a sugar-water solution, sugar is the solute and water is the solvent.

How can I crack UPSC mains?

10 Tips to Clear the UPSC Mains Exam

  1. Well Organised Strategy. The UPSC Mains exam is very tough as compared to the prelims.
  2. Syllabus Reading is Important.
  3. Don't Miss out on Current Affairs.
  4. Writing Practice.
  5. Prioritize the Compulsory Papers.
  6. Choose the Right Optional.
  7. Solve Mock Papers.
  8. Revision is must.

Does pent 2 ene show geometrical isomerism?

The compound that shows geometrical isomerism is Pent-2-ene.

Which one is correct essential feature of switchgear?

The essential features of switchgear are : Complete Reliability. Absolutely certain discrimination. Quick operation.

Dated : 25-May-2022

Category : Education

Leave Your Comment